2n Fixed line replacement with 2N SmartGate - Manual Bedienungsanleitung PDF herunterladen (Seite 64)

FAX and Data function

4.2

4.2 FAX and Data function

Only with fax converter supports fax and data functions.

Sending fax message or modem connection to and

from PSTN

FAX and data call to PSTN routed from FXS to FXO interface (DialThru gateway)



Sending fax message or modem connection to and

from GSM

GSM fax and Data connection

  with fax converter has ability to send and receive GSM fax

messages using analogue fax Group 3 connected to telephone line FXS. The fax

communication service must be registered with your GSM operator. It is possible to

establish data connection using analog modem connected to FXS line. It is useful

for devices with build-in modem, without possibility to use serial line. The

data communication service must also be registered with your GSM operator.

Sending a fax message to GSM and modem connection

through GSM

When connected device is able to send CNG tone (1100Hz for fax 1300Hz for

modem), the gateway recognizes whether the call id fax or data, the connection will

be established automatically. When the tone is not send or some problems with

recognition occurred, is necessary to dial before destination number code *01* for

fax call or *02* for data call. This code us used to inform the Gateway, that the

call is a fax or data call.

Receiving a fax message from GSM

It is recommended to activate separate fax number on your SIM card 

multinumbering scheme. Fax messages must be routed to fax number, data call

to data number. Incoming fax, data and voice calls will be than automatically

recognized. It is possible to set ring pattern for fax and data call, different from the

pattern for voice call.

If the fax or data number is not activated, the call from analogue network routed

to your GSM number is not detected as fax or data call and is routed via the

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 88 89

Keine Kommentare

2n Fixed line replacement with 2N SmartGate - Manual Bedienungsanleitung Seite 64