2n Fixed line replacement with 2N SmartGate - Manual Bedienungsanleitung PDF herunterladen (Seite 35)

Table of Parameters

3.2

Replace character + in CLI by Function No.: 149

If this parameter is filled, the + character in the international prefix of CLI is

replaced by the defined string. The + character can neither be transmitted by

the FSK protocol nor dialed by the DTMF from a terminal.

Setting options: 0-4 characters (0-9,*,#)

Default setting: blank

„BabyCall“ – Automatic call

BabyCall number Function No.: 180

A number to be dialed for the automatic call function. If this item is blank, the

function is disabled.

Setting options: 0-20 characters (0-9,*,#,+)

Default setting: blank

BabyCall timeout [s] Function No.: 181

Time between line Off-Hook and automatic call beginning (if enabled). During

this timeout   waits for dialing that cancels the automatic call.

You can make standard call if the BabyCall function is enabled.

Setting options: 0-255 s

Setting step: 1 s

Default setting: 0 s

Telephone interface FXO parameters

Dialing parameters

Number of rings before Off-Hook Function No.: 200

If is programmed as FXO gateway, parameter sets the count of

rings before Off-Hook.

Setting options: 1-255

Step: 1

Default setting: 1

Time for dialing start Function No.: 202

       



Setting options: 1-255 s

Step: 1 s

Default setting: 15 s

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 88 89

Keine Kommentare

2n Fixed line replacement with 2N SmartGate - Manual Bedienungsanleitung Seite 35