2n M2M Solution 2N SmartCom - User Manual 1.9.0 Bedienungsanleitung PDF herunterladen (Seite 120)

1202N TELEKOMUNIKACE a.s., www.2n.cz

<paramX> Description

AIN1 Analogue input 1

AIN2 Analogue input 2

DIN1 Digital input 1

DIN2 Digital input 2

PUL1 Pulse input 1

PUL2 Pulse input 2

CONx Reference condition where x = condition <id>

CNTx Internal counter, where x = counter <id> (1 - 5)

Constant Value to be used for comparison with paramX

NFG Network Fail GSM

Caution

The parameters that are listed as digits, i.e. and , which mayAIN PUL

be 0 – 100, or 0 – 4294967295, are converted to logic values as

follows: if their value is , their state will be .0 0

Make sure that is set to make the syntax evaluateSC PING NFG

connection states correctly.

The following operators can be used for evaluation:

<operator> Description

> param1 is greater than param2

< param1 is smaller than param2

== param1 is equal to param2

>= param1 is greater than or equal to param2

<= param1 is smaller than or equal to param2

&& Conjunction

Disjunction

! Negation

Use the standard syntax, i.e. , to compare the<param1><operator><param2>

measured value. However, you can just write If you omit the operator<param1>.

and enter one parameter only, the parameter is automatically considered as logic even

with and . When this parameter becomes effective, the set action will beAIN PUL

executed.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 148 149

Keine Kommentare

2n M2M Solution 2N SmartCom - User Manual 1.9.0 Bedienungsanleitung Seite 120