2n Helios IP Automation Manual v2.8 Bedienungsanleitung PDF herunterladen (Seite 20)

202N TELEKOMUNIKACE a.s., www.2n.cz

Example

Activate switch 1 if the event defined on row 2 arises and the condition defined on row

3 is met:

Action.ActivateSwitch: Switch=1; Event=2; Condition=3

Action.SetOutput

The block defines the action necessary for setting of the intercom output toSetOutput

the required level.

Parameters

Event – define the event that launches the action.

Condition – define the condition to be met to execute the action. This parameter

is optional.

Output – define the output to be set.

Valid values:

relay1 – relay 1 on basic unit

relay2 – relay 2 on basic unit

output1 – output 1 on basic unit

output2 – output 2 on basic unit

cr_relay1 – relay 1 on card reader

cr_relay2 – relay 2 on card reader

cr_output – output 1 on card reader

redled – red LED indicator

led1 – LED 1 indicator

led2 – LED 2 indicator

led3 – LED 3 indicator.

There may be different lists of valid values for different 2N Helios IP

models; refer to the Available Digital Inputs and Outputs subsection.

Level – define the required output level. This parameter is optional.

Valid values:

0 – output deactivation

1 – output activation (default value).

Example

Activate Output1 if the event defined on row 2 arises:

Action.SetOutput: Output=output1; Event=2

Action.BeginCall

The block defines the action necessary for establishing of an outgoing call toBeginCall

the defined telephone number, SIP URI or user number included in the intercom phone

book.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Keine Kommentare

2n Helios IP Automation Manual v2.8 Bedienungsanleitung Seite 20